Floral Frame 5x7 Card

Hi friends! For todays card I am creating my very 1st 5x7 card. 

I'm using Scrappy Tails Crafts A7 Flower Cover plate die.

To start off I die cut the flower border from 110lb Neenah cardstock from Cutcardstock. 

The next step was to die cut the shadow layer. 

So I used the outer layer die and the inner die for that.

Then I colored my flowers and glued it to my shadow layer and then die cut THANK YOU FRIEND" 3x and stacked them up. I die cut the word shadows from 48lb Vellum from Cutcardstock as well.

Once that was done I glued it down to rough textured cardstock. 

I die cut 2 vellum leaves and stuck them under "for your kindness"

I added my panel to a black cardbase (130lb Epic Black cardstock) and some black splatter to the rough panel.

 The last step was adding iridescent gems to the flowers, shimmer and white gel pen to them as well. 

Thanks so much for stopping by.

Some of the links are affiliate  links & if you use them I'll receive a small commission at no extra cost to you at all.

Thanks for stopping by!🌸💗

The Rabbit Hole New Release-Spring Kitty Card Day 2 Hop

Hi guys! Im here today as part of a blog hop to celebrate The Rabbit Hole Designs New release. I used Spring Kitty illustrated by Tatsiana Zayats

 for my vellum card today! 

I started off by stamping my image with my go to Memento Tuxedo black ink onto 80lb Neenah cardstock from cutcardstock.  I colored it with Copic markers. I die cut it out with a circle die and then a black circle with a bigger circle die. 

Then I used Garden Trellis stencil from TRHD and I used Gray for a soft Background. Then I grabbed a reverse scalloped die cut and glued everything to my heavyweight vellum cardbase from Cutcardstock. 

I added foam tape to my circle  and and some vellum leaves.  

To finish off the card I added stickles to the flowers for sparkle & shine. 

I also added an inside panel since my card base is Vellum. 

Thats it. The next in the hop line up is back to The Rabbit Hole Designs. 

To celebrate the February 2022 release, The Rabbit Hole Designs is giving away two savings vouchers; one to a lucky Instagram follower and one to a lucky Fan Page follower. Winner will be chosen at random from the comments left on the INSTAGRAM post, and tagging friends, and also from commenting on the Fan Page post. So make sure to head on over to INSTAGRAM and look for the giveaway post @therabbitholedesignsllc and look for the post at The Rabbit Hole Designs Fan Page

by 11:59 p.m. PST 01-27-2022

Winners will be contacted via DM for the IG winner and announced in the Facebook Fanpage group on 01-28-2022

Oceans Of Love/Mixed Media

 Hi Rabbity Friends! Kelly Fusco here with a fun mixed media card featuring The Flower Whale Stamp from the Rabbit Hole Designs

To Start off I stamped the Flower Whale image onto 80lb Neenah cardstock from Cutcardstock using Memento Tuxedo Black ink. I colored my whale with Gray Copics and I used Teals, Blues & dark reddish browns THEN I added some shimmer pen to it as well.. 

For my panel I used a piece of Distress Watercolor cardstock and I wet it with a sprayer and then sprayed Blue, Light Blue & brown onto it . I added layers of colors and sometimes drying in between. After it was 100% dry I added some texture paste with a stencil for some dimension. I wanted it to look ocean-y. Is that a word? lol

Then I took my paper distresser and distressed the edges of the panel. I fussy Cut my whale out and I die cut the word "Love" and stacked it 3x high.

I added foam tape to the back of the whale and I curved my Love sentiment to curve along the top of the whale. 

I added Glossy Accents to the LOVE & to the floral parts of my whale and a few Bubble Blower Gems from Trinity Stamps. Thanks for stopping by.

Day 2 The Rabbit Hole New Release Hop

 Hello Rabbit Hole Friends! Its Day 2 of the New Release hop & I'm definitely feeling a rainbow vibe. For todays cards I'm using simply the Friend stamp for both

To start off I used The image of the woman and positioned it in the MISTI so I could just shift my cardstock and repeat stamping easily. I used Catherine Pooler inks for every color. Rockin Red, Orange Peel, Tiara, Grass Skirt, Aquatini, Suede Shoes, Royal Treatment & Pixie Dust. I then stamped my "Friend" & sentiment in Versafine Onyx ink. Then I used a Black Glaze Gelly Roll pen for my black splatter which I applied manually. Lastly I added some iridescent gems for some sparkle. 

I added foam tape to my panel and mounted in to my 110lb Neenah card base from Cutcardstock. For my 2nd identical card I used the man image and did the same thing but I used a black mat under my panel and I added some Pops of Color in Clear & Snowflake.

I hope you like these cards & you check out the new release! The next hop is  Deana-

www.designcreativebling.com

To celebrate the February 2022 release, The Rabbit Hole Designs is giving away two savings vouchers; one to a lucky Instagram follower and one to a lucky Fan Page follower. Winner will be chosen at random from the comments left on the INSTAGRAM post, and tagging friends, and also from commenting on the Fan Page post. So make sure to head on over to INSTAGRAM and look for the giveaway post @therabbitholedesignsllc and look for the post at The Rabbit Hole Designs Fan Page

by 11:59 p.m. PST 01-27-2022

Winners will be contacted via DM for the IG winner and announced in the Facebook Fanpage group on 01-28-2022

The above links are affiliate links. If you use any I will receive a small commission at NO extra cost to you. And Id be super grateful. Stay Crafty My friends!

Clarence Loves YOU! Ink Spray Fun

 Hi Guys! Kelly Fusco here with my very 1st blog post for The Rabbit Hole Designs featuring the Clarence & Clarice Stamp.

To start off I stamped my image onto 80lb Neenah cardstock from Cutcardstock with Memento Tuxedo Black ink. Then I colored in the image with copic markers. I used C05,C03,C01 & C0 I used a couple browns E31,E33 & E35. Then I took the Garden Trellis stencil and I sprayed it with distress spray stains (red,yellow,blue) in a rainbow order across my panel. I removed the stencil & went over it again with the coordinating colors in distress inks using my Bitty Blenders so the white wasn't too bright white. 

I originally had the stencil on a diagonal so that created these white stripes where the stencil border was. I added a few black dots to it 

I colored in the background of my image with Copic 100. I die cut it out with a scalloped oval die and colored the scalloped edges gray to match Clarence. I added foam tape to the back of my focal image & I die cut the word YOU and colored it to match the rainbow theme.

Its hard to see in pics but I added some glossy accents to his eyes, teeth, cheeks and the "LOVE" as well as the "YOU"

I took a black copic marker and went around the edges of my rainbow panel for a bit of definition. 

I added a few iridescent gems and I was done. I hope you like this card. 

If you get a chance stop by The Rabbit Hole Designs for more inspiration or to check out their shop. If you use any link above they are affiliate links. If you use any I will receive a small commission at NO extra cost to you. Thank you so much & stay crafty my friends!

Clarence & Clarice Love Each Other! The Rabbit Hole Birthday Hop

Hi Friends! For my 2nd card for The Rabbit Holes Birthday Hop I'm using the Clarence & Clarice stamp. 

To start off I stamped my image with Memento black ink onto 80lb Neenah Cardstock from Cutcardstock. 

I used my copics to color them and I drew a line on the ground with a Memento Marker. I then ripped the edges and added a bit of black from a blending foam pad (whatever was on it already). 

Then I grabbed a piece of heavyweight Vellum (48lb) also from Cutcardstock and I ripped that too.

I die cut the word "Love" from The Rabbit Hole and stacked it 3x. Colored with copics to match and added Star Dust stickles & then Glossy accents on top. Those 2 together look AMAZINGLY COOL!

I then took a 100lb Desert Storm Neenah card base (also from Cutcardstock) and I used The Rabbit hole Garden Trellis stencil and White pigment ink for the background and heat set it. 

Then I glued the vellum down (not the outer edges) and then added foam tape to my image panel. I adhered it all down and added "My Sweet" and "Love" to it. 

I added glossy accents to the heart, their eyes, ears, teeth & tongues. A bit if stickles to the skirt & bow. A few iridescent gems and thats it. 

I hope you like it. Next in the hop is Deana- www.designcreativebling.com 

 To celebrate the Birthday release, The Rabbit Hole Designs is giving away two savings vouchers; one to a lucky Instagram follower and one to a lucky Fan Page follower.  Winner will be chosen at random from the comments left on the INSTAGRAM post, and tagging friends, and also from commenting on the Fan Page post.  So make sure to head on over to INSTAGRAM and look for the giveaway post @therabbitholedesignsllc and look for the post at The Rabbit Hole Designs Fan Page by 11:59 p.m. PST 01-12-2022  Winner will be announced on The Rabbit Hole Designs blog 01-14-2022

The above links are affiliate links. I receive a small commission at NO extra cost to you if you use any. And Id be so grateful :) Stay safe, stay healthy & stay CRAFTY!

Easy Slimline Card

I love making Slimline cards and they are so popular now. 

So for this one I used Hero Arts Monarch Butterfly which gives incredible realistic results. 

I started off stamping the bottom layer in the light color, next layer in a darker shade (same color family) and the final outline in black. It would be great embossed too! I used Catherine Pooler & Hero Art Inks.

I die cut each butterfly, I lined them up how I wanted them to be and I used Glad Press n Seal to pick them up as a whole. I then added foam tape.

I die cut my panel from Trinity Stamps Quilted Cover die and added the polka dots from the Quilted trio coordinating stencil set in gray ink. 

My card base is 110lb Neenah from Cutcardstock  and measures 3.5" x 8.5".  I added a black mat slightly smaller. And my Quilted panel a bit smaller than that.

I adhered the butterflies to my panel and added some shimmer pen for some sparkle. I added Trinity Stamps unicorn tears gems for some more sparklie goodness (love those gems...drooling)

My sentiment was heat embossed using Versafine onyx with Clear embossing powder from WOW!. 

if you would like to see the video and more details heres the link:

https://youtu.be/Z5QlPSynGkc

Thank you so much for stopping by! Stay safe, stay healthy  & stay CRAFTY🖌🎨🖍✂️🌞🤗

***the above links are affiliate links. If you use any I will receive a small commission at NO extra cost to you whatsoever. Id be so grateful for any support! Big hugs! 🤗Remember, Kindness is always beautiful!🌈⭐🦋